37
Sawing out areas (see Picture D)
•
With a drill, drill a sufficiently large hole inside of the area to be sawed out.
•
Guide the saw blade (11) into this hole and begin to saw out the desired area.
Mounting the parallel guide
Millimeter-precise cuts can be obtained by using a parallel guide (19).
•
Using screwdriver loosen the tightening screw of the parallel guide (20).
•
Push the parallel guide into the guideway opening (23).
•
Align the guide rail and retighten the tightening screw (20).
Class 2 laser product
Laser guide
The built-in laser guide is intended to obtain a precision cut.
•
Laser can be switched on and off using the switch (16).
Metal cutting
When sawing metal, because of the heating up of the material and saw blade, apply e.g. a cool lubricant
along the cut line.
