V
acuum Kit Assembly
(optional equipment)
The vacuum kit, 15 feet long and 4” in diameter, is
used to vacuum and grind leaves, pine straw and
other loose organic waste. The kit is sold separately;
instructions are provided here and with the kit for
your convenience.
FIRST
Insert two 1.25”-20 carriage bolts from inside the noz-
zle and through the holes in the handle. Fasten with
the two 1/4”-20 serrated flange nuts provided using a
7/16” wrench.
SECOND
Push one end of the hose firmly into the nozzle. The
nozzle has what is called a “regressive” fit. Turn the
nozzle to adjust the angle of the handle in your hand.
THIRD*
Thread the other end of the hose into the adaptor
about 3 inches. You may need to tug it through from
the other side.
FOURTH*
When you want to use the vac, snap the adaptor into
the hopper
befor
e you turn on the power.
The adaptor
only fits with the DANGER decal on your right as you
stand behind the machine.
FIFTH & LAST*
Snap the cone cover over the chipper cone. This seals
off all air flow for maximum vacuuming power.
*
Patent pending design featur
ed in this step.
page 10
