CONTENTS:
PAGE 1
..................................
Important Safety Information
PAGE 2–4
.....................................
Initial Start-up & Testing
PAGE 4–6
..........................................
Dispensing Beverages
PAGE 7–8
.........................................................
Carbonation
PAGE 9
..............................
Temperature Controller Settings
PAGE 9
............................................................
Maintenance
INSTRUCTION MANUAL
IMPORTANT SAFETY INFORMATION
WARNING
Read entire manual for important
safety information before using
your KRYO. Failure to follow warnings
could result in injury & void warranty.
Please read this entire instruction manual for important
safety information prior to the use of your KRYO.
Failure to follow these instructions may result
in injury and/or product damage and will void the product
warranty.
GENERAL PRECAUTIONS:
•
If the KRYO has just been moved, do not turn on unless
the KRYO has been standing upright for 24 hours. Failure
to do so will void warranty. Stand the KRYO in the upright
position for 24 hours before plugging into the power socket.
•
Ensure that there is always at least 4" of clearance on each
side of the KRYO to allow adequate airflow. Not allowing
adequate ventilation will reduce performance, increase
power consumption and void warranty.
•
Perform a pressure test on all product lines prior to use.
•
Do not run the pump dry. Ensure the pump is always
submerged when in operation. Running dry can damage the
pump.
•
Only clean product lines with cold to warm water. Do not
use hot water to clean the product lines.
1
