![background image](http://html1.mh-extra.com/html/patriot/as036-5/as036-5_user-manual_4026674032.webp)
32
Switching on and off
Press the switch (3) and hold it. To turn off, release the switch.
LED lighting
The working area is illuminated by a white LED (4) as long as the switch (3) is pressed.
Overheat protection
When the power tool works under heavy load and the battery heats up above safe level, the power tool
will stop automatically to prevent damage to the Li-ion cells. The battery temperature is monitored by a
sensor. The power tool will work again when the battery temperature drops below 45°C.
Working instructions:
•
Hold the power tool firmly.
•
Before leaving turn off the power tool and wait until the power tool stop still. .
•
Do not overload the tool. Follow the regular operating mode with stops.
•
The tool is designed for tightening and loosening screws with a maximum diameter of 5 mm and
small short screws into softwood. The length and diameter of the applicable screws depends on the
hardness of the wood, so first check if the tool can handle the selected screw on the wood.
•
Keep the tool as perpendicular as possible.
CARE, MAINTENANCE AND STORAGE
Warning: Other maintenance and repair work than those listed in this manual, must only be
performed by an authorized manufacturer's service. Safety and operational reliability can
only be guaranteed when using original spare parts.
The power tool is almost maintenance-free
•
Keep the power tool and the air vents clean and unplugged.
•
Make sure that no moisture reaches the inside of the power tool during cleaning.
Cleaning
•
Always switch off the power tool before cleaning and maintenance.
•
Wait until the power tool stop still.
•
Clean the power tool after every use.
•
Clean the power tool with a wet cloth. Do not use cleaning agents or solutions; these can corrode the
plastic parts of the power tool.
Storage
•
Keep the power tool in a dry and safe place. Remove the tool from the chuck.
•
When storing a lithium-ion battery for extended periods, check the state of charge regularly. The
optimal “storage” charge level is approximately 40-70%.
Содержание AS036-5
Страница 2: ...2...