Page 3 of 16
ASSEMBLY INSTRUCTIONS (continued)
For eave mounted only:
Swing the sensor head towards the mounting bracket.
Controls
Mounting Bracket
Controls
Controls
Turn off the power at fuse or circuit box.
Installation Steps
1. The fixture mounting bracket (A)
is pre-assembled on the light
fixture (B). Unscrew both the
decorative cover (DD) and the
fixture mounting screw (EE) in
order to remove the mounting
bracket (A).
2. Install the mounting strap (CC)
to the outlet box with the
stamped word “FRONT” facing
away from the outlet box,
using two mounting screws
(AA) that best fit the outlet box.
Mounting bracket(A) should
sit flush against wall surface
when secured. (Choose one
matching pair of suitable mounting screws (AA) from the
3 pairs provided).
2
FRONT
CC
AA
A
3.
Pull out the source wires from
the outlet box. Make wire
connections using wire
connectors (FF) as follows:
---Connect the black wire from
the fixture to the “hot” wire
from the power source.
---Connect the white wire from
the fixture to the neutral wire
from the power source.
Carefully tuck the wires back into the outlet box.
4. Place mounting bracket (A)
against the outlet box, insert
the mounting bracket screw
(BB) through the mounting
bracket hole, thread mounting
bracket screw (BB) into the
center hole of the mounting
strap(CC). Tighten the
mounting bracket screw (BB)
securely.
When mounting to a wall, the “UP” arrow must point
upward.
When mounting to an eave, the “UP” arrow must point
toward the building.
5. Attach the backplate(B) of the
light fixture to the mounting
bracket(A), secure it with the
fixture mounting screw(EE).
Then push the decorative cover
(DD) firmly into the fixture
mounting screw (EE) hole on
the light fixture.
6. With silicone caulking
compound, caulk completely
around where the mounting
bracket meets the wall
surface.
Outlet Box
3
FF
4
FF
BB
A
CC
Outlet Box
6
CAUTION: Be sure to
caulk completely where
the mounting bracket
meets the wall surface to
prevent water from
seeping into the outlet box.
1
A
B
DD
EE
5
A
B
DD
EE
Turn on the power at fuse or circuit box.
190717
