Page 8 of 16
FUNCTION AND OPERATION (continued)
13. The Setting list, You
can set up “Functions”,
“Change image”, “Rename
light”, and “Restore factory
defaults”.
14. Tap the “Functions”, You
can choose “Test”, “Auto”,
or “Custom Setting”.
Select “Test” in Manual
override and adjust
“Detection Distance” ,
“Brightness” and “CCT
change” as desired.
Then click “Save”.
15. Select “Auto” in Manual
override and adjust
“Motion Delay Time”,
“Detection Distance” ,
“Brightness” and “CCT
change” as desired.
Then click “Save”.
16. Select “Custom Settings” in
Manual Override for Customize
Early Evening Mode setting,
and choose option between
“Duration” or “Clock Time (End
Time)” to set the continuous
bright light illumination duration.
Within “Duration”, you may set
from 0 to 12 hours for
continuous bright light once
lamp is activated at night. In
“Clock Time (End Time)”, is the
time you set to deactivate the
continuous bright light according
to the actual hour in the mobile
device after the lamp is
activated. Both option settings
will return to motion-sensor
operation after the continuous
bright light is deactivate. 9:00
P.M. is the default in “Clock Time (End Time)”.
Note: "Duration" setting will only work once per
setting,
it automatically go into “Clock Time (End
Time) on the next day. Also if you do not click save
for either option, then the settings will follow according
to the switch control on the actual lamp.
190717
9:41 AM
Back
Take photo
Choose existing photo
Cancel
13
14
16
15
