Page 3 of 3
6. Attach the canopy(EE) to the electrical adapter, and secure with the set screws(CC).
Track ends must be terminated with end caps or connectors.
Turn on the power at fuse or circuit box.
ASSEMBLY INSTRUCTIONS (continued)
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326
Monday – Friday 9:00 a.m. – 5:00 p.m. CST
FIVE-YEAR LIMITED WARRANTY:
If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails
due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this
lighting fixture with the original sales receipt back to your nearest MENARDS retail store. At its discretion, PATRIOT
LIGHTING agrees to have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT
LIGHTING product or part free of charge, within the stated warranty period, when returned by the original purchaser
with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does
not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to
persons/property or costs. This warranty does give you specific legal rights and you may have other rights, which vary
from state to state.
R
R
R
R
●
To clean, turn off and wipe with a damp, non-abrasive cloth.
1) The light does not come on at all:
a) Check for loosen or disconnected wires in spot light.
b) Check that the connection between the adapter and the track is correct.
If unable to fix any of the above issues, please consult a certified electrician.
CARE AND MAINTENANCE
TROUBLESHOOTING
6
4b
Cement Ceiling
Anchor
Track
Track Screw
b. For cement ceiling:
Attach the track to the mounting bracket by aligning predrilled holes.
Insert the anchors through the holes of the ceiling, and then attach the
track screws through the holes of the track, and secure the track screws
to the anchors.
End cap
Electrical
Adapter
EE
CC
5
Polarity Tab
Track
Positive Polarity Slot
Electrical Adapter
Neutral
Ground tab
Hot contact conductor
Hot
Contact
Neutral
Contact
Ground
Contact
5. Insert electrical adapter into the
track. Rotate adapter 90° to
achieve a locked position and to
make electrical contact.
Note: Make certain polarity tab
on the electrical adapter is
pointed to the positive polarity
slot of the track during
installation.
