17/02/22
2187/20
CS 30056 - 45 RUE G. DE FLOTTE
13375 MARSEILLE CEDEX 12 (F
RAnCE
)
TEL : 33.(0).4.91.87.51.20 FAX : 33.(0).4.91.93.86.89
www
.
GyMnOvA
.
COM
NM304-GB
K
eep
this
D
ocuMeN
t
A
sseMBly
i
NstructioNs
for
M
AiNteNANce
Constantly aiming to improve our products, we reserve the right to make changes to the equipment and dimensions without further discussion.
s
et
of
4
replAceMeNt
BeveleD
p
ADs
for
c
oMpetitioN
s
priNGBoArDs
(2186 & 2187)
Warning:
This equipment should be installed by a qualified individual.
Using this equipment for purposes other than those originally intended is prohibited.
Compliance:
For this type of FIG-approved product, the replacement of spare parts (such as non-slip pads) does not maintain compliance with dimensional
requirements. This equipment will no longer be able to equip international FIG competitions.
Recommendations:
- Keep these instructions for subsequent reference (inspection, maintenance, etc.).
- Periodically carry out predictive maintenance.
- Depending on how much it is used have the equipment serviced yearly or every few years.
Tools required:
I. General maintenance:
i
MportANt
:
Regular cleaning of the apparatus makes it easier to spot any problems (distortion, breakage or moisture absorption).
Before each use, make a through check on good condition and correct operation of wear parts and safety elements:
- Check the condition of beveled Pads
(1’)
and and non-slip strips
(4)
.
- Check the condition of springs, straps and tray.
- Check the tightening of all fixings.
- If a problem is detected or suspected, do not use the equipment as long as it has not been checked by a technician.
- Any damaged or distorted component should be replaced as quickly as possible.
- Plastic mesh
- Water pump pliers
- Phillips
screwdriver
- Large flat
screwdriver
1
1’
x
4
2
3
3
K
eep
this
D
ocuMeN
t
