7
2. Product Installation
2.1. Rubber Feet Installation
Prior to the installation of this product, attach the enclosed rubber feet (four pieces) to the bottom surface of this
product.
2
Caution
• This product is designed for indoor use. Use this product in a location where it is not exposed to
rain and water. Exposure to rain and water may result in failure and electric shock.
• Install this product where the surface is stable and level. If this product is installed in an unstable
location or on an incline, the product may fall, resulting in damage.
• When installing this product, avoid installating it in the following places:
■ Where it’s exposed to direct sunlight
■ Where high temperatures are present, such as near fire, or in a humid place
■ Where drastic temperature and humidiy changes are present
■ Where it’s exposed to an environment with poor ventillation
■ Where it’s exposed to vibrations exceeding the specifications
■ Where it’s exposed to corrosive gas
■ Where it’s exposed to a salty air environment
■ Where it’s exposed to dust, iron powder, etc.
■ Where it’s exposed to high concentrations of chemicals or oil mist
■ Where it’s exposed to rain, or other types of wet environments
Peel off the release paper
and attach to the four corners
Rubber Feet (four pieces)
Main Unit
