In
tro
4
For safe application, observe the following:
The following symbols classifes the following into different catagories and explains the level of harm inflicted if the
cautions are disregarded.
Warning
Indicates an imminently dangerous condition: failure to follow the instructions may lead to
death or serious injury.
Caution
Indicates a potentially dangerous condition: failure to follow the instructions may lead to
slight injury or property damage.
Prohibited This symbol indicates “Prohibited”, which should not be carried out by any means.
Enforced
This symbol indicates “Enforced”, which should be observed and carried out by all means.
MEMO
Notice regarding supplementary information or convenient explanation is indicated.
Cautionary Notes
Prior to installation, read all notes and use this product correctly.
Warning
•
Do not modify or disassemble this product. Failure to follow these instructions could result in fire or
electric shock.
• Do not use this product when there is condensation. Failure to follow these instructions could result in
fire or electric shock.
• Do not leave or use this product while the LED unit are detached or broken. Doing so may result in
electric shock.
• Do not touch the electric socket with wet hands. It may result in electric shock.
•
Do not allow the voltage to exceed the specified voltage tolerance. Exceeding the voltage ratings
beyond the rated voltage will cause internal circuitry damage. Moreover, possible fire may also occur.
• Do not disconnect and re-insert the DC plug while the AC adaptor is plugged in. Possible electric shock
and damage may occur.
• Always use a power supply within the operating voltage range. Failure to follow this instruction could
result in fire or product failure.
• In the unlikely event that there is an abnormal situation such as smoke or odors emitting from the
product, immediately cut the power supplied to the product. Continued use of the product in this
condition could result in fire or electric shock.
• When plugging into the power receptacle, be sure to check there is no dust accumulation on the plug,
and insert into the power receptacle completely. By allowing dust to adhere, it can be the result of fire
or failure from short-circuiting.
• Since dust can accumulate After a long time, and with moisture, can cause the dust to become
conductive, in order to prevent the phenomenon of ignition from dust accumulation, it is best to
periodically wipe the transformer and socket terminal with a damp cloth. By allowing dust to adhere to
the power receptical, it can be the result of fire or failure from short-circuiting.
• When an unusual odor, sound or smoke comes out of the product, immediately disconnect the power,
then contact your nearest PATLITE Sales Representative.
• When an unusual odor, sound or smoke comes out of the product, immediately disconnect the power,
then contact your nearest PATLITE Sales Representative.
• In order to prevent serious effects on human life and property etc. caused by malfunction of this
product, ensure sufficient safety such as using in combination with other equipment.
Caution
•
Do not expose it to high temperatures, such as near a fire and do not use it in humid places. Moreover,
do not use this machine in locations where corrosive or combustible gas is present.
• If foreign substances, such as water, medicine; or metals, such as copper, low carbon steel wire, fall
into this product, please do not use it. Possible cause of failure may occur.
• Do not bend the power supply cables or signal wires recklessly. Failure to comply will result in possible
malfunction due to disconnection.
• Do not install or run wiring near, or where equipment (such as solenoids, etc.) generate strong electric
or magnetic fields, or near any power lines. Failure to comply may result in malfunction due to inductive
noise.
• Do not place any part of this product (Body, AC Adaptor, Rubber Feet) where infants can reach it. If
it is swallowed accidentally, it could be detrimental. If it is suspected of being swallowed, consult an
emergency medical center immediately.
• Do not use excessive force to set up the switches. Possible damage or malfunction may occur.
• Do not adjust switches with a sharp object.Possible damage to switches may cause it to be impossible
to operate or cause partial movement of the contacts.
• Please place this product on a level surface, such as a desk etc.
•
When installing in high places, such as a top shelf, fix the Main Unit so it cannot move or fall.
