10
2.4. "Set" Switch
The operation mode of this product can be changed by changing the “Set” switch located on the side of this
product, before power activation.
The operation modes available are as follows:
Operation Mode
Set Switch
Function
1
2
3
Normal Operation Mode
OFF OFF OFF
Operation by commands of
“3.2. Normal Operation Mode”
PHU Compatible Mode
OFF OFF
ON
Operation by commands of
“3.2. Normal Operation Mode”
Firmware Update Mode
ON
OFF OFF
Updating firmware for this product
MEMO
•
For instructions on updating the firmware, download the instructions from Patlite’s home page
and check the manual.
2.5. Buzzer Switch
It is possible to adjust ON or OFF by moving the buzzer switch left and right.
MEMO
• If it is set to OFF, the buzzer not sound
Caution
•
During normal operation mode and firmware update mode operation, even if it sends commands during
the PHU compatibility mode, don’t operate it. After changing Modes with the Set Switch, re-switch on
the power source before transmitting.
•
During PHU compatibility mode, or firmware update mode operation, even if it sends the command in
normal operation mode, don’t operate it. After changing Modes with the Set Switch, re-switch on the
power source before transmitting.
2
1 2
ON↓
3
Set Switch
1 2
ON↓
3
DIP Switch
ON
OFF
