17
3.2.2.3.
<Set ID for this product>
Sending ASCII data in the following form will change the ID of this product. Two ASCII bytes are designated in the
data section to change to a new ID. The configuration range for each byte of data in the data section can set up
from 0 [30H] to ? [3FH].
[Transmission Example]
In this example,
the ID set at 56 [35H 36H] shall be changed to 21 [32H 31H].
• Send Data
Header
ID
Command
Data
End Code
@
[40H]
5
[35H]
6
[36H]
?
[3FH]
2
[32H]
1
[31H]
!
[21H]
• Reply Data
Normal Response
Data
ACK
[06H]
Response Error
Data
NAK
[15H]
The following are conditions in which will get a NAK reply, and the error contents are as follows.
Transmission Condition
Error Contents
Command Error
When commands other than a command from the list are specified
Data error
When the data outside of 0[30H] - ?[3FH], is specified
Data size error
When the number of bytes in the send data is different
Timeout
When the reply interval for every byte exceeds 5 seconds after receiving a header
*Do not transmit the following command, before this product transmits reply data. It may not operate
normally.
3