22
3
3.3.6.
<Turn all Output Terminals OFF>
Sending data in the following format will control all the Output Terminal conditions to turn “OFF.”
[Transmission Example]
In this example, all the Output Terminals are turned OFF.
• Send Data
Header
ID
Command
End Code
@
[40H]
?
[3FH]
?
[3FH]
C
[43H]
!
[21H]
• Reply Data
Normal response
Data
ACK
[06H]
Response Error
Data
NAK
[15H]
The following are conditions which will get a NAK reply and the error contents.
Transmission Condition
Error Contents
Command error
When a command other than on the list of commands is specified
Data error
When data, other than 0[30H] - ?[3FH], is used
Data size error
When the number of bytes in the send data is different
Timeout
Reply interval between data is more than 5 seconds after receipt of header
* Do not transmit the following command, before this product transmits reply data. It may not operate
normally.
