13
2
2.5. "Set" Switch
The operation mode of this product can be changed by changing the set switch located on the side of this product,
before power activation.
The operation modes available are as follows:
Operation Mode
Set Switch
Function
1
2
3
Normal Operation
OFF
OFF
OFF
Operation by commands of
“3.2. Frame Format”
Setup Test
OFF
ON
OFF
Operation by “4. Setup Test Mode”
Firmware Update
ON
OFF
OFF
Updating firmware of this product
MEMO
•
For instructions on updating the firmware, download the instructions from Patlite’s home page
and check the manual.
Caution
• When in the “Setup Test” and “Firmware Update” Modes, the commands for the “Normal
Operation Mode” will not work. Therefore, put the “Set” Switches in the “Normal Operation
Mode” and reactivate the power before sending commands.
2.6. "Clear" Switch
Pressing the “Clear” switch will turn off the output terminals.
1 2
ON↓
3
Set Switch
1 2
ON↓
3
