Patlite LR6-IL, Руководство по эксплуатации

Страница: 13 / 29

– 13 –
<Troubleshooting the Buzzer Unit Attachment>
The Buzzer Unit is generally in the status shown in the diagram below after removal.
Groove
Rib
Buzzer Unit
(Detached)
Bottom View
Positioning
Mark
Buzzer Unit
LED Unit
Body
The rib inside of the Buzzer Unit fi ts into the groove when the
Buzzer Unit has been removed from the product.
Caution
Check to make sure the rib inside of the Buzzer Unit fi ts into the groove if the Buzzer Unit does not attach properly. Attach
the Buzzer Unit by referring to the next page if the rib does not fi t into the groove as shown in the diagram below.
In addition, the rib may slide out of the groove during removal as shown in the diagram below depending on how the
Buzzer Unit was removed.
Attaching the Buzzer Unit to the product again in this state may result in damage.
Buzzer Unit
Bottom View
Groove
Rib