Software
RESET
Camera
Sensor
LED Light
Illumination
Switch
Zoom-In
Zoom-Out
Autofocus
Autofocus
Lock
Freeze
Rotate
Camera
Reset
Operating
Operating the document camera is easy with the onboard
Document Camera Controls, found on the
top right corner of the
Pilot X/S Tablet:
Zoom-In: Zooms in on the camera’s view area.
Zoom-Out: Zooms-out of the camera’s view area.
Autofocus: Enables automatic focusing on the dominate object in the camera’s view area. Periodically
readjusts focal point to keep the dominate object in focus.
Autofocus Lock: Fixes the focal point on the most dominate object in the camera’s view area, and
retains that focal point until deactivated.
Camera Reset: Resets the camera’s main board when an error occurs. Use a small object, such as the
tip of a paper clip.
Rotate: Rotates the camera’s image 180º.
Freeze: Freezes/unfreezes the camera’s image.
Please note that the
Document Camera Controls may not be compatible with 3rd party softwares, and are
designed to work best with the included
Flex 11 software program.
The document camera also features an
LED Light for added illumination in darker areas. Toggle the
Illumination Switch found on the Camera Head to activate or deactivate the LED Light.
The tablet comes with two document software programs preinstalled:
Flex 11.
Questions? Contact HoverCam Technical support for more information at http://www.hovercam.com/support.
FLEX 11
Flex 11 is a dedicated document camera software for live lesson presentation and
annotation, video recording, still image capture, document scanning, digital whiteboarding
and much more. Note: Flex Whiteboard may be installed as a separate program.
For the full software downloads, updates and training visit:
https://www.hovercam.com/flex11
Document Camera 18
