Pathway Connectivity
VIA 12 Manual
V3 – April 2015
7
Network Setup
Allows review of the IP address, subnet mask and default gateway used by the switch.
To edit these properties, push the knob again.
The first octet of the IP address will be highlighted. Turn the knob to change the value,
and push to accept. Illegal values for an IP address, such as 0.0.0.0, are blocked.
The entire subnet mask value will be highlighted. Rotate the knob to select from list of
valid subnet masks.
Property
Explanation
Available Settings
IP Address
Set IP address for node
Turn knob to set each octet.
Push to accept. Illegal values
are not shown.
Subnet Mask
Set subnet mask for node
(Only valid masks are shown)
Entire subnet mask is
highlighted. Turn knob to select
from list of valid masks.
Default Gateway
Set default gateway for node
(Only valid gateways
accepted)
Turn knob to set each octet.
Push to accept. Illegal values
are not shown.
Once the values have been set, acceptance options appear on the bottom line of the
screen. Turn knob to choose from following options.
Option
Explanation
Discard Changes
Discards all changes and returns to base menu
Save Changes
Saves changes and returns to base menu.
NOTE: Changes are not yet applied to switch.
Save Changes and Reboot
(recommended)
Saves changes and reboots the switch. Changes
will apply once reboot is finished.
