Pathway Connectivity
Quattro Manual
September 2014
9
Setting Port Properties
From the Port Status screen of the desired port, push the button. The Port
Configuration screen will be shown.
The property available for editing will be highlighted in reverse video. Rotate the
knob to scroll through the list of properties. Push the knob to select for editing.
The list of choices will be displayed, with asterisks on either side of the current
setting. Highlight the desired new setting by rotating the knob and push to select.
The asterisks will now appear beside the new setting. Scroll to the bottom of the
list and select “<Back>” to return to the previous menu level.
The following properties are available from Port Configuration. Further options
may be added from time to time:
Property
Explanation
Available Settings
DMX Port
Turns blue power light on/off
Enable (default)
Disable
Port Direction
Sets DMX direction for port
Input
Output (default)
Patch
Allows selection from a list of
standard universe patches
Unpatched
Univ 1 through Univ 63999
DMX Speed
Sets DMX output speed (no
effect on ports set as inputs)
Slow (32 packets per second)
Medium (37 pps)
Fast (40 pps)
Maximum (44 pps) (default)
<Back>
Returns to previous menu
Advanced Configuration
Several node and port properties may only be altered using Pathport Manager
software, available on the Pathway website: www.pathwayconnect.com.
Please refer to the Pathport Manager manual for information on these values and
how to set them.
Firmware upgrades may only be done using Pathport Manager.
RDM (Remote Device Management) also requires Pathport Manager software.
Port x Configuration
DMX Port: Enabled
Port Direction: DMX Out
