Pathway Connectivity
Quattro Manual
September 2014
7
Setting Node Properties
With the default display showing, press the encoder knob. The Node
Configuration menu will be shown.
The current menu choice will be highlighted in reverse video. Rotate the knob to
scroll through the list. Push the knob to select the highlighted menu option.
Scroll to the bottom of the list and select “<Back>” to return to the previous menu
level. The following are the Node Configuration menu options.
Node Configuration
Network Setup
Device Info / Status
Protocol Support
Utilities
<Back>
Network Setup
Property
Explanation
Available Settings
IP Address
Set IP address for node
Select, then turn knob to set
each octet. Push to accept.
Subnet Mask
Set subnet mask for node
Select, then turn knob to set
each octet. Push to accept.
Default Gateway
Set default gateway for node
(Not typically required)
Select, then turn knob to set
each octet. Push to accept.
Link Max
Set the maximum connection
speed for the Ethernet port
Auto Negotiate (default)
10Mb Half Duplex
10Mb Full Duplex
100Mb Half Duplex
100Mb Full Duplex
<Back>
Returns to previous menu
Device Info / Status
Property
Explanation
Available Settings
Serial Number
Reports Node’s serial number
MAC Address
Reports Node’s MAC address
Firmware Version
Reports current firmware
version
<Back>
Node Configuration
Network Setup
Device Info / Status