January 2021
22
Pathport® OCTO - 64XX - Manual
RETAINING DEVICE SETTINGS FROM UNKNOWN DOMAINS
In the unlikely event that you don’t know the password of a Security Domain, but you’d like to retain all its configuration, try
the following:
Without logging in to a Domain, all devices that appear with amber padlocks are
read-only
. Save a show file, and the
configuration of all devices is saved. You can then factory default the devices using the prescribed method.
See the Pathway website, under
Support > Reference Articles > Factory Defaulting Ethernet Devices
for detailed
instructions.
Once they reappear in Pathscape as
Ready to Secure
, add them to a Security Domain and log in. Once all devices
appear with a
Green Padlock
, open the show file and
Send All Transactions
to restore the network configuration and
patch.
USING OLDER VERSIONS OF PATHSCAPE WITH NEW DEVICES
If you use Pathscape 1 or Pathscape 2 with devices shipped after
January 1, 2020 (Version 5 firmware or later)
, you will
not be able to configure them.
You must use Pathscape 4 or later
. As a reminder, the device label will appear in the earlier
versions of Pathscape as “
Use latest Pathscape PC software to secure
”. Other properties will be shown and are correct,
but any attempts to change them will fail.
Содержание Pathport OCTO 64 Series
Страница 7: ......
