PATCHWORK BlackBox 510, Руководство по эксплуатации

Страница: 58 / 60

58
Using the Guidance Screens
Using Guidance and Field Recording (VRT Mode)
Once the guidance screen is open and the VRT plan map is loaded, it is ready to
start a guidance recording job.
Setting and using a guidance line (VRT Mode)
Start the job by doing a headland pass of the field, the green trace line will be
drawn where the work has been done (When the BlackBox is connected to a
controller the trace recording will automatically turn on when the implement is
working or off when not working).
When at the beginning of the last straight of the
headland run,
press on the guidance bar area to set
the guidance line A position. Just before the end of
the run press the guidance bar area a second time to
set the guidance line.
Once the guidance line is set use the guide arrow and
distance off „
D:
‟ number
in the guidance bar to keep on centre with the line.
After doing a turn in the headland, the next guidance line will appear ready to
centre up to. The current guidance line track being used will be identified by a
number next to the
T: in the guidance bar area. The guidance line tracks are set
at equal distances based on the implement width set in the Recording details
menu. As the guidance lines are set, tracks can be missed and returned to later
if turning between tracks is to tight (use the trace recording to identify non
worked areas).
Resetting the guidance line
The Guidance line can be reset at any time
by pressing the guidance bar area, an option
box will appear asking „Reset Guidance‟ with
two options, Yes to reset or No to cancel. If
the guidance is reset the guidance line needs
to be set again using the method above.
This example shows that the
driver is not centre to the line
and needs to steer/move 20 cm
to the right to be back on centre.
AB SET
A SET
Position A
set
Guidance
line
set