53
Using the Guidance Screens
...Using Guidance and Field Recording
Using First Pass Guidance (With a Boundary)
N.B.
To reset the AB line press the area used to set the A
and B points and select
Yes
when prompted.
Step 1
- Position the vehicle in the field where the job will begin. (When using a
curved line it is important to use the longer edge of the field to set a guide line).
The farm field name will be automatically detected from the field boundary map.
Step 2
- Press
Start New Job
and then
OK
to confirm Farm/Field name.
Step 3
- Select
First Pass Straight
or
Curved
.
Step 4
- Press
Menu
and then
Show
Headland
, to display the Headland
guidance line.
Step 5
- Turn on the Green Trace
using selected method (see page 35).
At the beginning of a straight run
press the
Grid area
to set point A.
Step 6
- Drive to the end of the run
and press the
Grid area
to set B.
Use the Headland guidance line
around the first few passes.
Step 7
- When the headland work is
complete press
Toggle Guidance
to
switch to the set AB line for guidance
in the inner area of the field.
Grid
area
Grid
area
Содержание BlackBox 510
Страница 2: ......
