5
X
s
Preamp Owner’s Manual
heat in installation, by providing for free air circulation around the product.
The X
s
Preamp is not expected to generate much heat; A 10 degree C
rise above ambient would be typical of the control chassis and the power
supply is expected to have a negligible temperature rise above ambient.
A minimum of 5 cm (2 inches) should be allowed for both side-to-side
and vertical clearance.
Electronics should not be subjected to sources of excessive radiant heat.
Excessive heat can shorten the life of the product and may cause the
electronics to self protect and shut down. Under no circumstances may the
ventilation openings be blocked with items such as newspapers, cloths or
drapes. No naked sources of flame, such as candles may be placed on or
near this product.
Servicing: To reduce the risk of fire, electrical shock or other injuries,
the user should not attempt to service the device beyond that which
is described in the operating instructions. All other servicing must be
referred to qualified service personnel.
Servicing by a qualified technician is mandatory when the apparatus has
been damaged in any way; such as when a power cord is damage, when the
device has been exposed to moisture or liquids, been dropped or does not
operate normally in any way.
For Units With Externally Accessible Fuse Receptacle: Unplug the device
from all sources of power before changing or inspecting any fuse. Replace
fuse only with one of same physical size, type and rating as that specified
by the manufacture for that product.
There is no power switch on the X
s
Preamp, the unit is presumed to
operate continuously.
Safety disconnect for this product is the detachable power cord by design.
There are no internally mounted user serviceable fuses or other
components within this product. Any service issues must be refereed to a
qualified electronics service technician
Installation: It is presumed that the two X
s
Preamp chassis will be stand
mounted. If installed on a cart or stand, the cart or stand must be rated by
the manufacturer to support beyond the product weight. Extreme caution
must be exercised if moving the product while installed in stand or cart to
avoid tipping and possible physical injury.
Ambient Temperatures: Normal temperature rise of this device in
extended operation is 10 degrees C. Do not operate this device in an
environment greater than 45 degrees Celsius.
