Paslode Cordless Framing Nailer Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 22

Paslode Cordless Framing Nailer Скачать руководство пользователя страница 5

5

Safety Instructions

The following safety instructions have been included in this
booklet to provide you with basic information necessary for
safe operation of the Paslode Cordless framer. DO NOT
ATTEMPT TO OPERATE THIS TOOL UNTIL YOU HAVE
READ AND UNDERSTAND ALL SAFETY PRECAUTIONS
AND MANUAL INSTRUCTIONS.

In addition to these instructions, training may be necessary.
Contact your Paslode representative for additional
information.

DANGER

The Paslode Cordless
framer is an internal
combustion device. It
produces hot exhaust
gases that may ignite
flammable materials. This
tool must not be used in a
combustible environment
or in the presence of
combustible materials,
such as flammable
chemicals, adhesives,
gasoline, or solvents.

WARNING

Do not attempt to operate
this tool until you have
read and understood all
safety precautions and
manual instructions.

Failure to follow all safety
precautions and
instructions may result in
a permanent loss of vision,
serious personal or even
fatal injury, property
damage and/or tool
damage.

WARNING

Do not expose the tool to
temperatures in excess of
120

°

F (49

°

C). Fuel and/

or the battery may burst,
releasing flammable gas.

WARNING

ALWAYS keep the
Paslode Cordless framer,
fuel cell, battery cell and
battery charger out of the
reach of children.

WARNING

This tool must be operated
only in a well-ventilated
environment, because
the tool exhausts carbon
monoxide similar to a gas
chainsaw or lawnmower.
Exposure to carbon
monoxide may cause
dizziness, nausea, or
unconsciousness.

«
...
3
4
5
6
7
...
»

Содержание Cordless Framing Nailer























Отзывы:

Нет отзывов