4
An Overview of the Paslode Cordless Framer
Description
The Paslode Cordless
framer is a self-contained, fully
portable nailer that uses liquid hydrocarbon fuel to power a
unique linear drive internal combustion motor.
In order for you to fully understand the information contained
in this manual, you need a basic understanding of the
Paslode Cordless framer. As you can see in the illustration
below, the Paslode Cordless framer is made up of two
separable assemblies: handle and motor.
As you examine the Paslode Cordless framer, become
familiar with the two major assemblies and the various
components located in each of them.
The Handle Assembly contains the fuel cell, battery indicator
light, magazine, follower, lockout, shear blocks and trigger.
The Motor Assembly contains the cover and filter, the
motor housing, the nose, and the work contacting element.
Specifications
Dimensions:
Weight 6.9 pounds
Height 14 1/2 inches
Length 12 inches
Cycle Rate:
Intermittent Operation – 2 to 3 nails
per second
Continuous Operation – 1000 nails
per hour
NOTE: Exceeding these rates could cause tool to overheat,
resulting in loss of performance or damage to tool
components.
By using the Paslode Cordless framer at its recommended
cycle rate, you will be able to drive several thousand nails in
a typical workday.
Fasteners:
Maximum 3-1/4 inch x .131 diameter shank
for the Impulse Cordless framer.
Magazine Capacity: 1 nail strip + 5 fasteners.
Battery :
6 volts DC - Provides enough energy to
drive approximately 4000 fasteners on a full
charge.
Fuel Cell:
Liquid hydrocarbon - Provides enough fuel
to drive approximately 1200 fasteners.
®
Cover and Filter
Motor Housing
MOTOR ASSEMBLY
Nose
Adjustable
Work-Contacting
Element
Lockout
Shear Blocks
Follower
Trigger
Channel magazine
HANDLE ASSEMBLY
Battery
Compartment
(Opposite Side)
Battery
Indicator Light (LED)
Fuel Cell Compartment