2
Introduction and Warranty
Paslode Cordless Framer
Operating Manual
This manual is intended to acquaint you with the Paslode
Cordless framer. Unlike other power fastening tools, the
Cordless framer is powered by an internal combustion
linear motor. In simpler terms, your Paslode Cordless
framer is powered by a motor similar to the one that
powers an automobile. The Paslode Cordless framer
ignites a fuel and air mixture to produce the energy to
drive the motor, which in turn drives the fastener. As you
will see, the Paslode Cordless framer is totally self-
contained. It carries its own fuel supply and battery, along
with a supply of fasteners.
For ease of use, this manual is divided into sections (see
Contents). Each section of the manual is written with you,
the tool operator, in mind. We have left out all of the
technical terms so that you can readily understand how
to get the maximum performance from your Paslode
Cordless framer, and how to avoid damaging the tool or
injuring yourself. But, to accomplish this, we need you to
do two things:
1. READ THE MANUAL FROM COVER TO COVER
BEFORE USING THE TOOL.
2. FOLLOW ALL INSTRUCTIONS IN THE MANUAL.
The Paslode Cordless framer should be handled like
other power fastening tools that you use. Like most tools,
when used improperly it could result in injury. If you are
going to allow others to use the Paslode Cordless framer,
it is your responsibility to make sure that they also read
and comply with the instructions in this manual before
attempting to operate the tool.
Should you have questions about the Paslode Cordless
framer, or wish to obtain additional copies of this manual,
please contact your Paslode
®
representative. The space
below is provided so that you may record your
representative's name, address, and telephone number.
My Paslode representative is:
Name
Address
City
State
Zip
Telephone Number
Paslode
®
Cordless Warranty and Limitations
Paslode warranty that new Cordless power fastening tools, parts
and accessories will be free from defects in material and
workmanship for the period shown below, after the date of delivery
to the original user.
ONE-YEAR LIMITED WARRANTY
A one-year warranty will apply to all parts, except those listed
below as normal wearing parts, or parts which are specifically
covered by an extended warranty.
FIVE-YEAR EXTENDED LIMITED WARRANTY
A five-year warranty will apply to all molded nylon parts:
•
Motor Housing, Cap and Grille
•
Handle Halves and Actuator
•
Trigger
•
Magazine Parts
90-DAY LIMITED WARRANTY
A 90-day warranty applies to the following parts, which are
considered normal wearing parts:
•
Bumper
•
Driver Blades
•
O-Rings
•
Piston Rings
WARRANTY STATEMENT
Paslode's sole liability hereunder will be to replace any part or accessory
which proves to be defective within the specific time period. Any replacement
part or accessory provided in accordance with this warranty will carry a
warranty for the balance of the period of warranty applicable to the part it
replaces. This warranty does not apply to part replacement required due to
normal wear.
This warranty is void as to any tool which has been subjected to misuse,
abuse, accidental or intentional damage, use with fasteners, fuel, batteries,
or battery chargers not meeting Paslode specification, size, or quantity,
improperly maintained, repaired with other than genuine Paslode replacement
parts, damaged in transit or handling, or which, in Paslode's opinion, has
been altered or repaired in a way that affects or detracts from the performance
of the tool.
PASLODE MAKES NO WARRANTY, EXPRESSED OR IMPLIED, RELATING
TO MERCHANTABILITY, FITNESS, OR OTHERWISE, EXCEPT AS STATED
ABOVE, and Paslode's liability AS STATED ABOVE AND AS ASSUMED
ABOVE is in lieu of all other warranties arising out of, or in connection with,
the use and performance of the tool, except to the extent other wise provided
by applicable law. PASLODE SHALL IN NO EVENT BE LIABLE FOR ANY
DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT
NOT LIMITED TO, DAMAGES WHICH MAY ARISE FROM LOSS OF
ANTICIPATED PROFITS OR PRODUCTION, SPOILAGE OF MATERIALS,,
INCREASED COST OF OPERATION, OR OTHERWISE.
Paslode reserves the right to change specifications, equipment, or designs
at any time without notice and without incurring obligation.