background image

®

PS-3517

Technical Support

5

012-15719A

Copyright

This PASCO scientific instruction sheet is copyrighted with all rights 

reserved. Permission is granted to non-profit educational institutions for 

reproduction of any part of this manual, providing the reproductions are 

used only in their laboratories and classrooms, and are not sold for profit. 

Reproduction under any other circumstances, without the written consent 

of PASCO scientific, is prohibited. Rev: 10/17

Trademarks

PASCO, PASCO scientific, PASCO Capstone, PASPORT and 

SPARKvue are trademarks or registered trademarks of PASCO scientific, 

in the United States and/or in other countries. All other brands, products, 

or service names are or may be trademarks or service marks of, and are 

used to identify, products or services of, their respective owners. For more 

information visit www.pasco.com/legal.

Product End of Life Disposal Instructions:

This electronic product is subject to disposal and recycling regulations that 

vary by country and region. It is your responsibility to recycle your 

electronic equipment per your local environmental laws and regulations to 

ensure that it will be recycled in a manner that protects human health and 

the environment. To find out where you can drop off your waste equipment 

for recycling, please contact your local waste recycle/disposal service, or 

the place where you purchased the product.
The European Union WEEE (Waste Electronic and 

Electrical Equipment) symbol (to the right) and on the 

product or its packaging indicates that this product 

must not be disposed of in a standard waste 

container.

Содержание PS-3517






Отзывы: