background image

Wireless Rotary Motion Sensor

Experiments

8

013-15949A

See the PASCO web site at www.pasco.com for more information.

Mounting the Wireless Rotary Motion Sensor to a Gyroscope

Use the Gyroscope Mounting Bracket (ME-8963, available separately) to 
mount the Wireless Rotary Motion Sensor to the Three-Axis Gyroscope 
(ME-8960). Remove the gyroscope assembly from the vertical shaft of the 
large “A” base. Mount the Gyroscope Mounting Bracket onto the vertical 
shaft. Remove the three-step pulley from the Wireless Rotary Motion 
Sensor, and mount the sensor on the Gyroscope Mounting Bracket with the 
thumbscrews included with the bracket. Mount the slotted guide arm onto 
the shaft of the Wireless Rotary Motion Sensor. Replace the gyroscope 
assembly on the vertical shaft.

See the PASCO web site at www.pasco.com for more information.

Experiments

Experiments for the Wireless Rotary Motion Sensor in electronic format are available to download from the PASCO 
web site. 

www.pasco.com

Go to the web site, enter PS-3220 in the Search window, and check under Resources.

Three suggested experiments are:

Rotational Inertia of a Point Mass

Rotational Inertia of Disk and Ring

Conservation of Angular Momentum.

Specifications

Item: 

Value

Three-step Pulley

10, 29 and 48 mm diameter

Sensor Dimensions

9 cm by 6.5 cm by 4 cm, 6.35 mm diameter shaft

Resolution

±0.09° or 0.0078 mm
0.02 mm (linear) and 0.09° (angular) at 2,000 points per revolution

Hanging 

mass

PASCO 

Cart

PASCO 

Track

Mounting rod

Gyroscope 

Mounting 

Bracket

Slotted 

guide 

arm

Содержание PS-3220
























Отзывы: