PS-3220
Introduction
3
013-15949A
Software Help
See the SPARKvue Help or PASCO Capstone Help for information about collecting, displaying, and analyzing data.
•
In SPARKvue, select the HELP button (
) in any screen including the Home Screen.
•
In PASCO Capstone, select
PASCO Capstone Help
from the
Help
menu, or press
F1
.
Compatibility
For more information about wireless compatibility, see the PASCO website at:
www.pasco.com/compatibility
See Appendix B for more information about the PS-3500 Adapter and Mac OS X models.
Initial Step: Charge the Battery
•
Connect the Cable
: Use the Micro USB Cable to
connect the micro USB port on the side of the sensor
to a USB
port
or USB
charger
such as the PASCO
PS-2575 USB Single Port Charger. Charging begins
automatically. The charger circuit inside the sensor
turns itself off when the unit is fully charged. The
battery status LED will shine yellow as the battery is
charging, and will shine green when the battery is
charged. The battery is partially charged at the
factory. Initial charging time may be three hours or
longer depending on the power source and the
condition of the battery.
ON/OFF Information
To turn the sensor on, press the ON button. The status
LEDs will blink. To turn the sensor off, press and
hold
the ON button for a moment until the status LEDs stop
blinking. The sensor puts itself to sleep after one hour of inactivity if connected, and after several minutes if not
connected.
Platform
Bluetooth SMART Compatibility
iOS
iPad 3 and later
iPhone 4S and later
iPod touch 5 and later
SPARK LX / LXi
All models
Android
Android 4.4 and later
Chromebook
Chrome OS (requires PS-3500 Adapter*)
Mac OS X
Models introduced July 2011 or later*
Windows
Windows 7 and later (requires PS-3500 Adapter*)
[]
To Micro USB port
Micro USB cable
To USB port
Micro USB
Port
ON/OFF
Button
Platform