PASCO h/e Apparatus, Инструкция по эксплуатации

Страница: 4 / 22

h/e Apparatus and h/e Apparatus Accessory Kit 012-04049J
ii
®
Equipment Return
Should the product have to be returned to PASCO
scientific for any reason, notify PASCO scientific by
letter, phone, or fax BEFORE returning the product.
Upon notification, the return authorization and ship-
ping instructions will be promptly issued.
➤ ➤
➤ ➤ ➤
NOTE: NO EQUIPMENT WILL BE
ACCEPTED FOR RETURN WITHOUT AN
AUTHORIZATION FROM PASCO.
When returning equipment for repair, the units must be
packed properly. Carriers will not accept responsibility
for damage caused by improper packing. To be certain
the unit will not be damaged in shipment, observe the
following rules:
➀
The packing carton must be strong enough for the
item shipped.
➁
Make certain there are at least two inches of pack-
ing material between any point on the apparatus and
the inside walls of the carton.
➂
Make certain that the packing material cannot shift
in the box or become compressed, allowing the
instrument come in contact with the packing carton.
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone: (916) 786-3800
FAX: (916) 786-3292
email: techsupp@pasco.com
web: www.pasco.com
Copyright Notice
The PASCO scientific 012-04049J h/e Apparatus and
h/e Apparatus Accessory Kit manual is copyrighted
and all rights reserved. However, permission is granted
to non-profit educational institutions for reproduction
of any part of the manual providing the reproductions
are used only for their laboratories and are not sold for
profit. Reproduction under any other circumstances,
without the written consent of PASCO scientific, is
prohibited.
Limited Warranty
PASCO scientific warrants the product to be free from
defects in materials and workmanship for a period of
one year from the date of shipment to the customer.
PASCO will repair or replace at its option any part of
the product which is deemed to be defective in material
or workmanship. The warranty does not cover damage
to the product caused by abuse or improper use.
Determination of whether a product failure is the result
of a manufacturing defect or improper use by the
customer shall be made solely by PASCO scientific.
Responsibility for the return of equipment for warranty
repair belongs to the customer. Equipment must be
properly packed to prevent damage and shipped
postage or freight prepaid. (Damage caused by im-
proper packing of the equipment for return shipment
will not be covered by the warranty.) Shipping costs
for returning the equipment after repair will be paid by
PASCO scientific.
Copyright, Warranty, and Equipment Return
Please— Feel free to duplicate this manual
subject to the copyright restrictions below.
Credits
This manual edited by: Dave Griffith
Teacher’s guide written by: Eric Ayar