PASCO Brolight SE-9629 Скачать руководство пользователя

Страница: 2 / 17

Table of Contents

Equipment List - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1

Limited Warranty and Limitation of Liability - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2

Safety Information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2

Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3

Background Information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

Principle of the Experiment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

Installation and Maintenance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

Experiment Procedure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10

Appendix A: General Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13

Appendix B: Teacher’s Notes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14

Appendix C: Technical Support - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15

Appendix D: Product End of Life Disposal Instructions - - - - - - - - - - - - - - - - - - - - - - - 15

Содержание Brolight SE-9629

















