SE-9629
Electron Charge-to-Mass Ratio
2
012-14265A
Limited Warranty and Limitation of Liability
This Brolight product is free from defects in material and workmanship for one year from the date of purchase. This warranty
does not cover fuses, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation
or handling. Resellers are not authorized to extend any other warranty on Brolight’s behalf. To obtain service during the war-
ranty period, return the unit to point of purchase with a description of the problem. THIS WARRANTY IS YOUR ONLY
REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR
IMPLIED.BROLIGHT IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAM-
AGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the exclusion
or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you.
Safety Information
• Clean the equipment only with a soft, dry cloth.
• Before use, verify that the apparatus is not damaged.
• Do not defeat the power cord safety ground feature.
• Plug into a grounded (earthed) outlet.
• Do not use the product in any manner that is not specified by the manufacturer.
• Do not install substitute parts or perform any unauthorized modification to the product.
• Line and Current Protection Fuses: For continued protection against fire, replace the line fuse and
the current-protection fuse only with fuses of the specified type and rating.
• Main Power and Test Input Disconnect: Unplug instrument from wall outlet, remove power cord,
and remove all probes from all terminals before servicing. Only qualified, service-trained
personnel should remove the cover from the instrument.
• Do not use the equipment if it is damaged. Before you use the equipment, inspect the case. Pay
particular attention to the insulation surrounding the connectors.
• Do not use the equipment if it operates abnormally. Protection may be impaired.When in doubt,
have the equipment serviced.
• Do not operate the equipment where explosive gas, vapor, or dust is present. Don't use it under
wet conditions.
• Do not apply more than the rated voltage, as marked on the apparatus, between terminals or
between any terminal and earth ground.
• When servicing the equipment, use only specified replacement parts.
Recommended Equipment for Alternate Data Recording Method
Model
Quantity
850 Universal Interface
UI-5000
1
PASCO Capstone Software
UI-5400
1
High Current Sensor
PS-2193
1
WARNING: To avoid possible electric shock or personal history, follow these guidelines.
