manualshive.com logo in svg

Pasco Scientific ME-9429A, Инструкция по эксплуатации и руководство по экспериментам

Поделиться
Скачать
Pasco Scientific ME-9429A Скачать руководство пользователя страница 8

4

Dynamics Cart Accessory Track Set

012-05035E

Installing the Adjustable End Stop

The Adjustable End Stop can be used at any point on
the track as a bumper. Either the plunger bar on the
cart or the cart's magnetic bumper can be used to
rebound off the End Stop because the End Stop
contains magnets. The cart can also be stopped against
the End Stop when the velcro end of the cart hits the
velcro side of the End Stop. This is useful when it is
desired to keep the cart from rebounding. There is also
a post on top of the End Stop to allow a string or
spring to be attached. Assembly is as follows:

➀

The Adjustable End Stop Assembly consists of the
End Stop with two magnets installed, a black plas-
tic thumb screw, and a square nut.

➁

If photogate brackets are to be used, it is best to in-
stall the End Stops in the groove opposite to the
side being used for photogates so the End Stop can
slide past the photogates without interference.

➂

Align the square nut within the groove on the de-
sired side of the Dynamics Cart Track as shown.
Locate and adjust the End Stop to the desired posi-
tion and tighten the thumb screw to secure.

➃

When storing the End Stop when it is not on the
track, remember that it has two strong magnets in
it. Keep the End Stop away from computers.

Attaching Adjustable End-Stop to Track

The Friction Block is a wood rect-
angle that fits neatly on top of the
Dynamics Cart (ME-9430).

The top and bottom surfaces of the Friction
Block have a slot which allows a “picket
fence” to be inserted. (See the
PASCO catalog.) An eye
screw is provided so
that you may easily
attach a string to
the block.

The exposed wood on the top and one side of the block
produce minimal friction. Felt pads attached to the
bottom surface and the other side provide more
friction. Mass can be placed on the top surface of the
Friction Block as shown.

In experiments that use the Friction Block you will
investigate some of the properties of sliding friction -
the force that resists the sliding motion of two objects
when they are already in motion.

Using the Friction Block

Содержание ME-9429A















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды