manualshive.com logo in svg

Pasco Scientific ME-9429A, Инструкция по эксплуатации и руководство по экспериментам

Поделиться
Скачать
Pasco Scientific ME-9429A Скачать руководство пользователя страница 41

37

012-05035E

Dynamics Cart Accessory Track Set

Experiment 4: Oscillations on an Incline

Notes on Calculations

➀

The spring constant k = 1.5595 for the spring tested
here. Actual spring constant will vary, although it
should be close to 1.5 for the springs supplied with
this apparatus.

➁

Theoretical values will vary, depending on the
value for k and for m. For best results, measure the
carts rather than assume their weight to be the
stated 500g.

Notes on Questions

➀

The period does not vary significantly as the angle
changes. There is some variation due to
nonlinearity in the spring; as the spring is extended
at greater angles, the force “constant” is not con-
stant. The contribution due to friction changes with
angle, as well.

➁

The experimental results should agree with theory
to within 2%, although it is not unusual to find
agreement within less than 1%.

➂

The equilibrium position changes as the angle is
changed.

➃

The period would be the same at 90°, as long as the
spring was not overstretched. NOTE: hanging the
PASCO dynamics cart from the spring supplied
with this equipment will overextend the spring.

Notes on Procedure

The angle of inclination of the track should be
between 5 and 15° for best results. You may want
to measure the spring constant by hanging masses
directly from the spring (vertically) without the
cart. This is a better method than the one described
in the experiment guide.

0

0.05

0.1

0.15

0.2

0.25

0.3

0

0.02 0.04 0.06 0.08

0.1

0.12 0.14 0.16 0.18

0.2

Force (N)

Distance (m)

f(x) = 1.0*x + -6.913319E-3
R^2 = 9.935830E-1

Содержание ME-9429A















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды