User Manual, MAR-5915-2x
User Manual
Chapter 2 Operation
MNL-0655-01 Rev A6
ECO-5592
Effective: 05 Feb 19
Page 21 of 40
Horizontal Mounting
To install the DuraMAR5915-2X on its side (horizontal):
1. Create a hole pattern on the mounting surface that matches the pattern shown in Figure 4. The
mounting holes are 0.33
” in diameter.
2. Attach the switch to the mounting surface using the two side mounting holes. Attachment screws
should be 5/16-18.
Important!
Ensure that mounting screw length allows proper thread engagement of the mounting hardware.
Figure 4. Side Mounting Holes
.400”