Plug the included AC adapter into the standard AC power outlet to power the
unit. Connect small end to
DC INPUT
jack of your unit. After adapter
connection, Press
POWER button ( unit or remote ) to turn on unit. slide
the SOURCE selector of your unit to DVD /USB /LINE IN / Blutooth mode.
To activate the mote control, remove the little tag sticking out of the battery
compartment by pulling on it. Once the tag is removed the remote will be ready
for use.
Replacing the Battery of remote control
Batteries shall not be exposed to excessive heat such
as sunshine, fire
Be sure that the batteries are installed polarity correctly.
Only same or equivalent type batteries as recommend
are to be used.
Do not dispose of batteries in fire, battery may explode
or leak. Do not try to recharge a battery
。
SETUP POWER
Connect Power Adapter
Notes For Remote Control
