Partner RP-100-300II, Руководство по программированию

Страница: 46 / 56

-------------Thermal Printer-------------
45
0≤yL≤255
0≤d≤255
k = (xL + xH x 256) x (yL + yH x 256) (k ≠ 0)
[Description] Selects Raster bit-image mode. The value of m selects the mode, as follows:

xL, xH, select the number of data bits (xL+ xHx256) in the horizontal direction for the bit image.

yL, yH, select the number of data bits (yL+ yHx256) in the vertical direction for the bit image.
[Details] In standard mode, this command is effective only when there is no data in the print buffer.

This command has no effect in all print modes (character size, emphasized, double-strike,
upside-down, underline, white/black reverse printing, etc.) for raster bit image.

If the printing area width set by GS L and GS W is less than the minimum width, the printing area is
extended to the minimum width only on the line in question.
The minimum width means 1 dot in normal (m = 0,48) and double-height (m = 2, 50), 2 dots in
double-width (m = 1, 49) and quadruple (m = 3, 51) modes.

Data outside the printing area is read in and discarded on a dot-by-dot basis.

The position at which subsequent characters are to be printed for raster bit image is specified by
HT (Horizontal Tab), ESC $ (Set absolute print position), ESC \ (Set relative print position), and GS
L (Set left margin). If the position at which subsequent characters are to be printed is not a
multiple of 8,print speed may decline.
 The ESC a (Select justification) setting is also effective on raster bit images.

When this command is received during macro definition, the printer ends macro definition, and
begins performing this command. The definition of this command should be cleared.
 d indicates the bit-image data. Set time a bit to 1 prints a dot and setting it to 0 does not print a dot.
GS w n
[Name] Set bar code width
[Format] ASCII GS w n
Hex 1D 77 n
Decimal 29 119 n
[Range] 2≤n≤6
[Description] Set the horizontal size of the bar code.
.Binary-level bar codes are as follows:
CODE39, ITF, CODABAR
[Default] n = 3
[Reference] GS k
m Mode Vertical Dot Density Horizontal Dot ensity
0,48 Normal 200 DPI 200 DPI
1,49 Double-width 200 DPI 100 DPI
2,50 Double-height 100 DPI 200 DPI
3,51 Quadruple 100 DPI 100 DPI
n specifies the bar code width as follows:
n Module Width (mm) for
Multi-level Bar Code Binary-level bar codes
Thin element width (mm) Thick element width (mm)
2 0.25 0.25 0.625
3 0.375 0.375 1.0
4 0.5 0.5 1.25
5 0.625 0.625 1.625
6 0.75 0.75 1.875
.Multi-level bar codes are as follows:
UPC-A, UPC-E, JAN13 (EAN13), JAN8 (EAN8), CODE93, CODE128