Partner RP-100-300II Скачать руководство пользователя страница 40

Страница: 40 / 56

-------------Thermal Printer-------------

cuts it.

·The horizontal and vertical motion unit are specified by

GS P

·The paper feed amount is calculated using the vertical motion unit (y).

However, the value cannot be less than the minimum horizontal movement amount, and it

must be in even units of the minimum horizontal movement amount.

GS W nL nH

[Name] Set printing area width

[Format] ASCII GS W nL nH

Hex 1D 57 nL nH

Decimal 29| 87 nL nH

[Range] 0≤nL≤255

0≤nH≤255

[Description] Sets the printing area width to the area specified by nL and nH.

·The printing area width is set to [(nL + nH X 256) X horizontal motion unit]] inches.

[Details] ·This command is effective only processed at the beginning of the line.

·In page mode, the printer performs only internal flag operations.

·This command does not affect printing in page mode.

·If the (left printing area width) exceeds the printable area, (printable area width

–

left margin) is used.

·The horizontal and vertical motion units are specified by

GS P

. Changing the horizontal and

vertical motion units does not affect the current left margin.

·The horizontal motion unit (x) is used for calculating the printing area width.

The calculated result is truncated to the minimum value of the mechanical pitch.

·If the width set for the printing area is less than the width of one character, when the

character data is developed, the following processing is performed:

①

The printing area width is extended to the right to accommodate one character.

②

If the printing area width cannot be extended sufficiently, the left margin is reduced to

accommodate one character.

③

If the printing area width cannot be extended sufficiently, the right space is reduced.

·If the width set for the printing area is less than one line in vertical, the following processing

is performed only on the line in question when data other than character data (e.g., bit
image, user-defined bit image) is developed:

①

The printing area width is extended to the right to accommodate one line in vertical for

the bit image within the printable area.

②

If the printing area width cannot be extended sufficiently, the left margin is reduced to
accommodate one line in vertical.

·The commands which set the printing area width for bit image printing and its minimum

widths are as follows:

·Bit image (

ESC

*):

Single density mode = 2 dots

Double density mode = 1 dot

·Downloaded bit image (

/):

Double width mode or Quadruple mode = 2 dots

Normal mode or Double-height mode = 1 dot

·NV bit image (

FS p

Double width mode or Quadruple mode = 2 dots

Normal mode or Double-height mode = 1 dot

·Raster bit image (

GS r 0

Double width mode or Quadruple mode = 2 dots

Содержание RP-100-300II

























































Результаты поиска

Содержание RP-100-300II

Отзывы:

Бренды по названию

Популярные бренды

Partner RP-100-300II, Руководство по программированию

Результаты поиска

Содержание RP-100-300II

Отзывы:

Бренды по названию

Популярные бренды