Partner RP-100-300II, Руководство пользователя

Страница: 9 / 9

16 17
14. DIP Switch
15. Auto Cutter Maintenance
Improper usage and/or bad quality thermal paper may cause the cutter jam
(stuck), thus printer cover is unable to open.
In this case, you may power cycle the power button (turn off and turn back on
after 3 seconds) and check if the auto cutter has recover itself from cutter jam
by trying to open the printer lid.
If print lid still can’t be opened, please follow below manual method to
restore the cutter back into position. 1
st
: Open the printer front cover, and
then start to turn the gear until the cutter knife has returned fully. Once it has
cutter knife has returned fully, you can open the printer lid.
Caution: Do not open the printer cover by force, doing so will result in
damaging the print head and auto cutter.
1 2 3 4 5 6 7 8
Sele
ct
cutt
er
Select
beeper
SELECT
PRINT
DENSITY
Two-byte
character
code
Character
per line
Cutter
with
cash
drawer
Select
baudrate
ON OFF ON Dark ON
42-font A
/56-font B
Yes
OFF ON OFF Light OFF
48-font A
/64-font B
No
Turn the gear to
reset the cutter
Open cover by the
arrow direction