Partner PT-6800 Скачать руководство пользователя

Страница: 27 / 52

Advanced BIOS Features

Access Mode

This item defines special ways that can be used to access IDE hard disks such as LBA (Large Block Addressing).
Leave this value at

Auto

and the system will automatically decide the fastest way to access the hard disk drive.

Press <Esc

to close the IDE device sub-menu and return to the Standard CMOS Features menu.

Video

This item defines the video mode of the system. This mainboard has a built-in VGA graphics system; you must leave
this item at the default setting.

Halt On

This item defines the operation of the system POST (Power On Self Test) routine. You can use this item to select which
types of errors in the POST are sufficient to halt the system.

Base Memory, Extended Memory, and Total Memory

These items are automatically detected by the system at start up time. These are display-only fields. You cannot make
changes to these fields.

•

Base Memory –

This field displays the amount of conventional memory detected by the system during boot.

•

Extended Memory –

This field displays the amount of extended memory detected by the system during boot.

•

Total Memory –

This field displays the total amount of memory (Base and Extended) detected by the system

during boot.

Press <Esc> to return to the main menu.

Advanced BIOS Features

Selecting Advanced BIOS Features on the main menu displays this menu:

Содержание PT-6800





















































Результаты поиска

Содержание PT-6800

Отзывы:

Похожие инструкции для PT-6800

Бренды по названию

Популярные бренды

Partner PT-6800, Руководство пользователя

Результаты поиска

Содержание PT-6800

Отзывы:

Похожие инструкции для PT-6800

Бренды по названию

Популярные бренды