Partner PT-6800, Руководство пользователя

Страница: 15 / 52

Attaching the customer display 7
Attaching the customer display
The PT-6800 may ship with a customer display attached. If you ordered the display separately, refer to the following to
attach it.
1
Remove the rear cover. See “Removing the
rear cover” on page 6.
2
Remove the screw.
3
Push with your thumbs as shown and lift up
to remove the panel cover.
4
While pushing from the underside, slide the
customer display cover firmly in the direc-
tion of the arrow to remove it.
5
Replace the panel cover and secure it with
the screw.
6
Connect the customer display cable.
7
Align the grooves on the customer display
bracket and slide the customer display
firmly into place.
8
Secure the display with the two supplied
screws.
IMPORTANT
To supply power to the customer display, the COM2 voltage setting should not
be changed from the factory setting. See “COM2 With Voltage” on page 30.