Partner PT-6212-EB, Руководство по обслуживанию

Страница: 25 / 78

17
SuperIO Configuration
Parallel Port Address
This item allows user to select the I/O address for the parallel port.
Parallel Port Mode
This item allows user to select the parallel port mode.
EPP Version
This item allows user to select the version of EPP.
ECP Mode DMA Channel
These items are used to assign the DMA channel for the ECP mode.
Parallel Port IRQ
This item allows user to select the IRQ for the parallel port.
Serial Port1/ 2/ 3/ 4/ 5/ 6 Address
These items are used to assign the I/O address for the serial port 1/ 2/ 3/ 4/ 5/ 6.
Serial Port3/ 4/ 5/ 6 IRQ
These items are used to assign the IRQ for the serial port 3/ 4/ 5/ 6.
Serial Port1/ 2 Voltage select
These items are used to select the voltage for the serial port 1/ 2.
Watch Dog Degree
This item allows you to select the degree for the Watch Dog function.
Watch Dog Timer
When select any time period, the Watchdog Timer will be enabled after that time period passes, every time the
system boots up. It will monitor the time taken for each task performed by the operating system. Any timeout
will cause it to reboot the computer.
Figure 2.7 SuperIO
Configuration sub-menu