Partner G20, Руководство по установке

Страница: 7 / 16

7
Note:
If a cylindrical connection is required, replace the clamp
that is installed at the factory with the cylindrical clamp from the
accessory kit.
The permissible natural gas connection types according to
country are as follows:
Liquid gas connection (LPG)
Caution!
Observe the country-specific guidelines.
If liquid gas (LPG) is used, the gas connection should be
established via a gas hose or a fixed connection.
Important information when using a gas hose:
■
A safety gas hose or a plastic hose (8 mm diameter) must be
used.
■
It must be secured to the gas connection using an approved
connecting device (for example, a hose clamp).
■
The hose must be short and completely leak-tight. The hose
can have a maximum length of 1.5 m. Observe the current
guidelines.
■
The gas hose must be replaced at least once a year.
Fit the flexible safety gas hose and use a screw connection or a
cable clamp to tighten it securely.
After establishing the connection, carry out a leak test. See the
section "Leak test" .
Country
EN 10226 R ^
(TS 61-210 EN
10226 R ^ )
EN ISO 228 G ^
(TS EN ISO 228
G ^ )
AT Austria X
BE Belgium X
CH Switzerland X
DE Germany X
ES Spain X X
FR France X
GR Greece X
IT Italy X X
NL Netherlands X
PT Portugal X X
HR Croatia X
SL Slovenia X
XS Serbia X
DE Turkey X X
PL Poland X X
RO Romania X X
AE United Arab Emirates X
ZA South Africa X
HU Hungary X
RU Russia X
GB England X
/3***