8
Key Operation
【
Focus+
】
/
【
Focus-
】
: Manual adjust focus value of zoom module to get clear image.
( default of zoom module is auto-focus.)
【
Zoom+
】
/
【
Zoom-
】
: zoom+/- get the ideal image.
【
Iris+
】【
Iris-
】
: Adjust the aperture to get brighter or darker image gradually. ( Some
zoom module is only with Auto Iris function)
【
Setup
】
: [Setup]+[Enter] to set the preset point of the camera or set the short
commands of the keyboard (See 2.5).
【
Preset
】
: [[Enter] to enable the preset point.
【
Menu
】
: press to enter Menu or to Return back.
【
Addr
】
: Address key, [Addr]+ID [Enter] to choose the corresponding IP address.
【
0
】～【
9
】
: Number keys [0], [1], [2], [3], [4], [5], [6], [7], [8], [9].
【
Clear
】
: Delete key, [Clear]+[Enter] to delete the preset point.
【
Enter
】
: Confirm key, to confirm the present operation.
【
Aux ON
】
: Aux ON.
【
Aux OFF
】
: Aux OFF.
2.4 Preset operation instruction
Preset instruction
Preset function means that store camera state (horizontal angle, tilt angle and lens
spec). It can realize recover the setting status in advance and call it.
2.4.1 Set preset
Move PTZ to the target position. Press “
” and No. key, for example: “
” and
press “
” button to confirm preset setting.
Remark: 1. New preset No. will cover the previous one if user used same preset number .
2. Max preset quantity always limited by the IP speed dome, but not the
keyboard controller.
2.4.2 Call preset
Please make sure the setting preset is successful. Otherwise, call preset will not valid
1. Press “
” button;
2. Input the preset number;
3. Press“
” button. PTZ will automatically run to the preset point setting
