7
2.4 Cleaning the Impeller
WARNING
：
Rotating the flywheel to free a lodged impeller can accidentally start the engine, resulting in serious
injury or death. Always remove the lanyard of emergency stop switch and remove all spark plugs.
It is possible for debris to lodge between the impeller and jet housing wall, especially after the engine
has been stopped. This will lock the driveshaft and will prevent the engine from being able to crank over
for starting. Following are steps for dislodging the impeller.
1. Position lanyard stop switch to the “OFF” position.
2. Remove spark plug leads to prevent the engine from accidentally starting.
3. Remove flywheel or rewind cover and rotate the engine flywheel counterclockwise.
If this does not dislodge the impeller, it will be necessary to remove the six screws and water intake
housing.
