Bloodhound Installation Instructions
Page 6 of 21
Step 3: Mount the router to the base plate.
A.
For AER2200 and E3000 routers,
mount the provided router mount brackets to the sides of the
router using eight M4 x 0.7mm thread x 6mm long screws (not provided), as shown in Figure 4.
Fasten the screws at opposite diagonal positions.
B.
Align the router with the holes on the cover plate.
Ensure the router orientation is correct, as
shown in the image below. The router display lights should be on the left.
Mount the router
using the eight PTA0399-TL pan head screws provided in the kit, as shown in Figure 5.
Figure 4: For AER2200 and E3000 routers, fasten the router mount brackets to the sides of the router using
eight M4 screws.
Figure 5: Mount the router to the base plate using PTA0399-TL screws.
