Great Pyrenees Installation Instructions
Page 7 of 8
Cable Connection Instructions
Step 1.
Use canned air and/or isopropyl alcohol to clean all the connectors to ensure that there is no dust in the
terminals.
Step 2.
Connect the antenna cables to the router. Use the table below for reference; different routers may have
different terminal names. Use a 5/16” wrench to carefully tighten the connectors on the cables to the router
terminals. It is recommended to use a 5 in.-lb. torque wrench to prevent over-tightening.
NOTE: Do not apply more than 5 in.-lbs. of torque to SMA connectors.
For best MIMO performance, use the antenna elements in pairs as follows:
-
LTE 1 & LTE 2
-
LTE 3 & LTE 4
-
LTE 5 & LTE 6
-
LTE 7 & LTE 8
-
Wi-Fi 1 & Wi-Fi 2
Antenna Cable
Router Connection
LTE 1
MAIN 0
LTE 2
AUX 0
LTE 3
MAIN 1
LTE 4
AUX 1
LTE 5
MAIN 0 on 2
nd
modem
LTE 6
AUX 0 on 2
nd
modem
LTE 7
MAIN 1 on 2
nd
modem
LTE 8
AUX 1 on 2
nd
modem
GPS
GPS
Wi-Fi 1
2.4/5GHz, gold left
Wi-Fi 2
2.4/5GHz, gold right
Bluetooth
BT
