Great Pyrenees Installation Instructions
Page 5 of 8
Pole Mounting Instructions
Installing the Pole Mount Bracket
Step 1.
Select a mounting location on a pole with a diameter between 1” and 2.25”. Ensure that the pole is vertical,
stable, and rigid.
Step 2.
Install the pole mount bracket onto the pole with the provided hardware. Around the pole, insert the V-bolt
through the clamp saddle then through the pole mount bracket. Fasten the V-bolts with the flat washers,
lock washers, and nuts. Ensure that at least 1” of the pole extends above the upper clamp saddle. (Figure 5)
Figure 5
Step 3
Tighten the four nuts until finger tight, making sure that the nuts are equally tightened. Using a 7/16”
wrench, tighten the nuts one additional turn to compress the lock washers.
