PARRY NPDF3, Инструкция по эксплуатации

Страница: 10 / 27

Parry -British Built for Purpose
IN244-3
8
Operating Instructions
Initial setup
Ensure all packaging has been removed and the tank has been cleaned thoroughly
before filling with oil. Check the drain tap is in the fully closed position and the
batter plate provided is fitted on top of the element.
Using Cooking Oil
Fill the tank with a good quality cooking oil, fill to the level mark indicated on the
front of the heating element.
Do not mix oil and fat
With the thermostat in the off position turn on the mains supply to the unit, the red
lamp will indicate that the power is on.
Turn the thermostat to the desired setting; the green lamp will illuminate showing
that there is power to the element, this will extinguish when the desired
temperature is reached. This procedure will be repeated automatically as the
thermostat maintains a constant temperature.
All models are fitted with a mechanical timer. This is used as a guide only, please
note that it will not cut off the power to the element.
Using Solid Fat (initial fill)
Using solid fat will need to be melted first prior to filling.
Fill the tank with melted fat to the level mark indicated on the front of the heating
element.
Do not mix oil and fat
With the thermostat in the off position turn on the mains supply to the unit, the red
lamp will indicate that the power is on.
Turn the thermostat to the desired setting; the green lamp will illuminate showing
that there is power to the element, this will extinguish when the desired
temperature is reached. This procedure will be repeated automatically as the
thermostat maintains a constant temperature.
See page 9 for cooled solidified fat operating instructions