ENGLISH
2
IMPORTANT: DriveBlue operates only when the cigarette-lighter is on. The blue light must be on.
IMPORTANT: Before using the DriveBlue, you must first pair it with your phone. See instructions below.
PAIRING WITH NOKIA 6310, 6310I, 8910, 8910I, 6650 AND 7600
You need to pair devices when powering up the DriveBlue for the first time or after resetting your hands-free. Subsequently,
all connections between your phone and the car kit are automatically established when both devices are within a few
meters range of each other. A 'beep' is heard when the connection is established.
Procedure :
Check that the blue light on top of the DriveBlue is on. You should hear the « Please pair device » instruction for the first
time. If not, reset your DriveBlue by pressing the green and the red buttons at the same time, and wait for « Please pair
device » instruction.
Now carry out the following sequence on your phone.
Access the Menu and scroll to "Bluetooth", press "Select". Find "On" to activate Bluetooth.
To "Search for audio accessories", press Select.
The display reads "Searching for devices". Please wait.
The display reads "Parrot DriveBlue v…", press "Select" to make the connection.
The display reads, "Enter password", enter 1234 then " Select".
From now on, when you press the keys on your phone, you should hear the sound coming through your vehicle
loudspeakers.
For more information, consult your Nokia phone user's guide.
LEARNING NAMES
To assign a voice tag to a name, access your directory by scrolling with the
or
keys. Find the desired name and click
on "Details", then "Options". Find "Add voice tag" and click on "Select".
The following message is displayed: "Press Start then speak after the tone".
Then press "Start" and say the name.
To remove the voice tag for any name, access your directory by scrolling through the
or
keys and click on "Details",
then "Options". Find "Voice tag" and click "Select".
By clicking "Change", you can re-record over the voice tag.
By clicking "Erase", you will delete the previous voice tag recording.
After getting into your car, your telephone should ask you whether you wish to establish
the Bluetooth connection with the DriveBlue. If you want to, you can disable this
function. To do that, go into the Menu, and select “Bluetooth” using the up and down
buttons.
Then, scroll until “view paired devices”, press “Select”.
<Parrot DriveBlue> appears, click on “Options”.
Scroll until «Request conn. Authorisation», enter «Select».
NOKIA
